Quick Answer: Can You Cut Springs To Lower Your Car?

Do lowering springs ruin ride quality?

1.

Lowering springs will make my ride feel more harsh.

Most lowering spring sets are designed to maintain most of your car’s factory suspension travel distance and are about 15% higher in spring rate design to preserve ride quality.

You will have a harsher ride from stiffer shocks, otherwise known as HD models..

Do lowering springs need time to settle?

It should only take a week or two to completely settle. Most of the settling should occur in the first 20 miles or so. After a couple of weeks get it realigned.

Does cutting springs increase spring rate?

Cutting coils does increase the spring rate. … The only thing that will change will be the length of the wire used to wind the spring. The longer the wire is the lower the spring rate. As the wire get shorter, such as when cutting the coil, the spring rate increases.

Is it safe to cut Springs?

The only coil springs that can be safely cut are coil springs with tangential ends. Because Square ends and Pigtail ends are designed to make full contact with their mounting points, they would have to be re-shaped after they were cut. … So, Coil springs with Square or Pigtail ends can not be safely cut.

How do you know if your coil springs are bad?

If the vehicle seems incapable of handling even the slowest encounters with speed bumps without bouncing excessively, you probably have a worn set of coil springs and shocks. … A truck with bad coil springs is also liable to bounce when you drive over gravelly or uneven terrain.

Is it bad to cut springs to lower car?

Cutting the coil springs of your Premallion with a hacksaw will certainly lower your car. … But by hacking the springs, you are really ridding the springs off its flexing ability. Some even go to an ignorant extent of cutting AND heating the coil springs. Never heat the coil springs- heat is its worst enemy imaginable.

Can you cut Springs while on the car?

You can lower your car by cutting the coil springs that are compressed in the strut above the car’s tires. A professional mechanic often carries out the process of cutting a car’s coil springs and lowering the vehicle. With a few tools, such as a coil compressor and angle grinder, you can cut the coil springs yourself.

Why you shouldn’t cut your springs?

Re: Why you should NOT cut your springs to lower your car Progessive the “pigtails” change dynamically as they are compressed. Cut this coil off and basically the spring ends up squishy. When adding any lowering spring either after market replacement or cut you are changing the stroke of the shock or strut.

Do lowering springs work?

Lowering springs lower your car’s center of gravity for better handling, but there are many other benefits to using them. … Fact: Springs that produce mild lowering of about an inch work well with newer factory shocks.